Español
English
Français
Italiano
Deutsch
Português
PolskiRange · Pallet manufacturing
CPTP
Top deck nailing machine with stacker
Top deck nailing machine with nail guns, board magazines and integrated stacker. A compact machine — 4 metres long by 2 wide — that makes top decks from 600 × 800 to 1,200 × 1,400 mm at a rate of 4 to 5 decks per minute with a single operator.
- The operator places the boards in the magazines and the nails in the drums; the machine does the rest and delivers the finished stack.
- The board unloading system accepts first- or second-grade boards.
- Nail guns with 1,000-nail jumbo magazines. Nails in a straight line or in zig-zag: zig-zag when the board is wide, to spread the nailing well across its whole surface; straight line when there is a narrower stringer underneath.
- Integrated stacker for up to 50 top decks.
- In the catalogue since 2008. Standard format up to 1,200 × 1,400 mm, customisable up to 1,200 × 1,600 mm.
Features
- Output
- 4 – 5 top decks per minute
- Operators
- 1
- Minimum top deck
- 600 × 800 mm
- Maximum top deck
- 1,200 × 1,400 mm (up to 1,200 × 1,600 mm to order)
- Nail gun magazines
- 1,000 nails (jumbo)
- Stacker capacity
- up to 50 top decks
- Format changeover
- manual
- Dimensions
- 4 m long × 2 m wide
Built for decades
Robust, long-lasting design, built for non-stop operation with minimal maintenance. Like every MAYPRO machine, the CPTP comes with the support of our engineering department: remote assistance, spare parts and upgrades, however old it is.
Longer videos of the CPTP at work, reserved for customers with access.
Three zones, one operator
What the machine does, and what you do.
Loading
The operator places the boards in the magazines and the nails in the drums. With a double magazine, the top deck can use two different board sizes.
Nailing
The nail guns nail the top deck in a straight line or in zig-zag depending on the board: zig-zag to spread the nailing across wide boards, straight line over a narrow stringer.
Stacking
The integrated stacker forms stacks of up to 50 top decks. The operator only has to remove them — or let the automatic outfeed with transfer do it.
Configuration
A compact machine that grows with your production.
The standard CPTP already includes the stacker. From there, each customer chooses what they need.
-
01
Board magazine
One, if all the boards in the top deck are the same. Double, if the top deck combines two timber sizes — the usual case when a pallet mixes different widths.
-
02
Nail guns with jumbo magazine
1,000 nails per drum and two nailing modes, straight line or zig-zag, selectable according to the board.
-
03
Integrated stacker
Up to 50 top decks per stack, within the 4 × 2 metre frame itself.
Options
- Double board magazine
- Automatic stack outfeed
- Outfeed transfer
- Adaptation for stringer pallets (long nails)
- Format up to 1,200 × 1,600 mm
And after the top deck
